top of page

Features & Benefits

  • Patented Angle Compensation Indication - automatically calculates and corrects the grade display for the angle of the dipper arm when excavating allowing the operator to check grade in multiple locations without moving the machine
  • Check grade with the dipper arm extended to or retracted up to 30 degrees
  • Four selectable accuracies – allowing for rough or precise work
  • Center on-grade provides an equal amount of grade information above and below on-grade when used with dozers, mini-graders, levellers and drag boxes
  • Offset on-grade provides more range above the on-grade position using the entire receiver to avoid over-digging
  • Robust and built for jobsite environment – 2 year warranty

Applications

  • Machine mounted grade checking
  • Grading and leveling
  • Excavation and trenching

Including

  • LR60 Receiver with Holding clamps
  • 4 x C-Cell NiMH Batteries
  • Charger
  • Case
  • Operating Manual
  • Magnetic Mount MM-1

Technical Data

  • Beam Reception Range: 360 degrees
  • Operating Range: Over 460 m (1500 ft) radius, laser dependent
  • Laser RPM:Minimum: 105; Maximum: 1200
  • Vertical Reception: 222 mm (8.75 in.)
  • Accuracy On-Grade (Grading): Setup 5 mm (0.20 in.) Fine 10 mm (0.40 in.) Standard 20 mm (0.80 in.) Wide 40 mm (1.60 in.)
  • Accuracy On-Grade (Excavation):Setup 6 mm (0.25 in.) Fine 12 mm (0.50 in.) Standard 25 mm (1.0 in.) Wide 50 mm (2.0 in.)
  • ACE—Angle Compensation Mode: Fine 12 mm (0.50 in.) Standard 25 mm (1.0 in.)
  • Plumb Swing Range: Standard ± 2.5° Angle Compensation Mode ± 10° to ± 30°
  • Display Output: Bright or Dim
  • Automatic Control Capability: Yes with CB20, CB25 & CB30 Control Boxes
  • Tilt Display: Yes with RD20 Remote Display
  • Power Options: Alkaline – 4 x “C” Cell – Standard Nickel Metal Hydride – 4 x “C” Cell Power Cable – 10 -30 V dc
  • LR60 Battery Life – Alkaline (Continuous in beam):75 hours, Display Dim / 45 hours, Display Bright
  • LR60 Battery Life – Ni-MH (Continuous in beam): 50 hours, Display Dim / 40 hours, Display Bright
  • Battery Recharge Time: 3 – 4 hours
  • Automatic Shutoff: 75 minutes with no laser beam
  • Out-of-Beam Indication: High and Low
  • Remote Display Option: Yes
  • Dimensions (LxWxD):394 x 142 x 149 mm (15.50 in. x 5.58 in. x 5.88 in.)
  • Mounting Pipe Round Tube (Outside Diameter) Square Tube: 42 mm to 50 mm (1.66 in. to 2.00 in.) 38 mm (1 ½ in.)

Operating Temperature: –20 °C to +60 °C (–4 °F to 140 °F)

Trimble / Spectra LR60W Machine Receiver c/w RD20 In Cab Display MM1

£2,075.00Price
    bottom of page