top of page
Pipe Tracer Flexitrace System - Pipe Tracing Rod
The Dart Systems Pipe Tracer (Flexitrace) Rod provides a lightweight and compact solution for locating ducts, pipes and drains. The unit can easily be transported and deployed by one person and provides an alternative to traditional pipe location techniques using a Cobra Rod / Duct Rods and a Sonde Transmitter to locate plastic pipes, pipe / duct obstructions or collapses. To be used in conjunction with a Cable Locator and Generator – compatible with any locator / generator which operates at 33Khz.
 
4.5mm Flexitrace System
The 4.5mm Flexitrace system reels hold up to 80 Mtrs of 4.5mm Diameter Rod. The Flexitrace Rod can be energised by a transmitter or Genny and inserted into pipes as small as 12mm Diameter to locate pipe runs or identify blockages. The Dart Systems Flexitrace is designed to work at 33Khz and will operate with industry standard Cable Locators.
 
6mm Flexitrace System
The 6mm Flexitrace system reels hold up to 120 Mtrs of 6mm Diameter Rod. The Flexitrace Rod can be energised by a transmitter or Genny and inserted into pipes as small as 12mm Diameter to locate pipe runs or identify blockages. The Dart Systems Flexitrace is designed to work at 33Khz and will operate with industry standard Cable Locators.
 
9mm Flexitrace System
The 9mm Flexitrace system reels hold up to 200 Mtrs of 9mm Diameter Rod. The Flexitrace Rod can be energised by a transmitter or Genny and inserted into pipes as small as 15mm Diameter to locate pipe runs or identify blockages. The Dart Systems Flexitrace is designed to work at 33Khz and will operate with industry standard Cable Locators.
 
When using 5 Watt or 10 Watt Transmitters some restrictions may apply - please contact us for more information.
 

Pipe Tracer Flexitrace System - Pipe Tracing Rod

£0.00Price

  • Sonde Location - Feed the rod into the duct and attach a Signal Generator to both terminals of the unit, this energises the end coil housing (Sonde) and allows it to be located as a traditional Sonde using a Cable Avoiding Tool.

     

    Line Location - Feed the rod into the duct and attach a Signal Generator to one terminal of the unit and the other terminal to an earth stake. The Rod can then be located along its whole length with a Cable Avoiding Tool.

    Allows the detection, location and determination of depth for buried non-metallic. Locate either the whole path of the pipe or only locate the tip of the Sonde.Works in pipes and ducts with a diameter as small as 12 mm diameter. Works with standard Signal Generator and C.A.T. (Cable Avoiding Tool) Manual brake fitted to maintain control of the rod. No batteries required. Lightweight and compact

     

    Construction

    Rod Diameter: 6mm

    Sonde Dimensions: 9mm Dia x 75mm

    Depth Range: Up to 3 Mtr depending on pipe construction and soil conditions.

    Construction: Glass Fibre Rod and copper conductors in a polypropylene sheath on a steel frame.

    Frame Dimensions: 700mm x 580mm x 250mm

    Warranty: 12 Months

bottom of page